Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. 12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion. 13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Questions? Visit 8 Trouble Shooting Trouble Shooting Unit doesn’t respond (no power) iPod does not dock properly iPod does not respond to the unit iPod doesn’t charge up Sound is distorted AC adaptor isn’t plugged to a wall outlet or the connector is not plugged into the power supply jack on the back of the unit Wall outlet is not functioning Batteries are weak/dead Batteries are weak/dead Replace current batteries with fresh ones Replace current batteries with fresh ones Using no or wrong iPod insert Possible Problem Symptom Solution iPod is not docked properly Your iPod software is too old iPod is locked up iPod is not docked properly Unit is operating on batteries/not connected to AC adaptor iPod is locked up/frozen iPod battery has problem Volume level is set too high Sound source is distorted Plug the AC adaptor into a wall outlet and plug the connector into the supply jack on the unit Make sure the dock insert is the proper fit to your iPod Remove your iPod from the dock and check for obstruction on the connectors in the dock and on your iPod. Then reseat it in the dock. Remove your iPod from the dock and check for obstruction on the connectors in the dock and on your iPod. Then reseat it in the dock. Upgrade software on your iPod via iTunes Please refer to your iPod manual for details.Please make sure your iPod is working properly before docking in the unit. Remove your iPod from the dock and check for obstruction on the connectors in the dock and on your iPod. Then reseat it in the dock. Please refer to your iPod manual for details. Please make sure your iPod is working properly before dock into the unit. Decrease the volume. Unit will not charge iPod when running on batteries. Connect unit to AC adaptor to charge iPod If iPod original sound source is poor quality, distortion and noise are easily noticed with high-power speakers. Try a different audio source such as a music CD. If you are using an iPod Shuffle or external sound source like older generation iPod, try reducing the output volume on the device itself. Also, try reducing bass. Dock or connector is obstructed Plug another device into a wall outlet (same outlet) to confirm the outlet is working 9 Solucionando Problemas Solucionando Problemas Causa PosibleSintoma Solucion La unidad no responde (no enciende) El iPod no encastra correctamente El iPod no se comunica con la unidad El iPod no carga El sonido sale distorsionado El adaptador de AC no ha sido conectado a la corriente electrica o el cable no ha sido conectado a la parte posterior de la unidad. El tomacorrientes no funciona. El encastre no es el correcto o no ha colocado encastre alguno. El iPod no esta colocado correctamente. El software (programa) de su iPod es obsoleto El iPod esta trabado El iPod no esta colocado correctamente. El iPod esta trabado. La bateria del iPod tiene algun problema. El nivel de volumen esta alto La fuente de sonido esta distorsionada Conecte el adaptador AC al tomacorrientes y el cable a la ficha de entrada de la unidad. Conecte otro aparato al mismo tomacorrientes para verificar si se encuentra activo. Verifique tener el encastre correspondiente antes de intentar acoplarlo al aparato. Retire el iPod de la muesca y elimine la obstruccion. Vuelva a acoplar su iPod. Actualice su programa via iTunes. Verifique el correcto funcionamiento de su iPod antes de acoplarlo a la unidad. Por favor, refierase al Manual del Usuario de su iPod para mayor informacion. Retire el iPod de la muesca y elimine la obstruccion. Vuelva a acoplar su iPod. Verifique el correcto funcionamiento de su iPod antes de acoplarlo a la unidad. Por favor, refierase al Manual del Usuario de su iPod para mayor informacion. Baje el nivel de volumen. Apague la funcion EQ/3D. Si la grabacion original de sonido del iPod o MP3 era de mala calidad, escuchara ruido/distorsion al ser amplificada mediante los parlantes de alta potencia. Intente utilizar otra fuente de sonido como la musica de un CD. Si utiliza un iPod Shuffle o una fuente de sonido externa como un iPod de generaciones anteriores, intente bajar el volumen del aparato en si. Tambien puede intentar reducir los bajos. La muesca o el encastre estan obstruidos. Retire el iPod de la muesca y elimin...