Votes - 4, Average rating: 3.8
(
)
)
|
manual abstract
Press the Alarm Button again and turn the Set Wheel to select a radio station or press one of the preset buttons to wake to apreset radio station (seeUsing Radio on page 4 for details on setting radio stations and presets). 6. Press the Alarm button again (or no button within 10 seconds) to exit the alarm setting mode. The alarm will be armed once set and the corresponding alarm icon will light up. The lower part of the display will show the earliest set alarm time. 3 Using the iP88 Reviewing, Arming and Disarming Alarm (Turn Alarm Function On and Off) 1. Once an alarm is armed, the lower part of the display will show the alarm time. If more then one alarm is armed, the earliest alarm time will show. 2. To review the alarm time, press an alarm button once. The related alarm time will show on the lower part of the display. 3. During alarm review, press the alarm button once to toggle it on or off. If the alarm is armed, the related alarm icon will light up. Resetting the Alarm to Come on the Next Day 1. When the alarm is sounding, press the Button to stop alarm and reset it to come on the next set day. For example, if alarm is set for 5 days and you press the alarm reset on Friday, the alarm will come on again on Monday, not Saturday. Snooze Operation 1. Press and hold the Snooze/Dimmer Button for a few seconds until the snooze time flashes. Turn the Set Wheel to set the snooze timer from 1 to 29 minutes. 2. Press the Snooze/Dimmer Button after an alarm sounds. The alarm will be silenced for the set snooze duration time then sound again. Snooze can be pressed several times during the 1 hour alarm cycle. Sure Alarm The iP88 has a sure alarm feature. If backup batteries are installed, the buzzer alarm will still sound in the event of a power failure. Charging your iPhone/Pod Note: Please make sure you are using the correct insert for your iPhone/iPod and that it is properly docked into the iP88. Failure to do so may damage your iPhone/iPod. 1. While an iPhone/iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully charged). Listening to iPhone/iPod 1. Dock the already playing iPhone/iPod in Dock 1 or Dock 2. The iP88 will automatically turn on and you will hear the music playing from your iPhone/iPod. Note: If the playing song/music loudness is too low on the iPod itself, the iP88 may not detect iPod is in play mode. Press the relative dock 1 or dock 2 Button to play it. 2. If an iPhone/iPod is playing in one dock and you dock another playing iPhone/iPod, the iP88 will keep playing the first iPhone/iPod and turn off the second/other one. Press the dock 2 Button to play the iPhone/iPod in dock 2 and turn off dock 1 (and vice versa). 3. When an iPhone/iPod is docked and in standby mode, press the relative Button (dock 1 or dock 2) to play it. “Dock-1” or “Dock-2” will appear briefly in the lower part of the display to show which dock is currently in play mode. 4. Press the Button again to pause play; press again to resume it. 5. Turn the Volume Wheel to adjust the system volume. 6. Press the EQ Button to select and turn the Set Wheel to set Treble, Bass,3D Sound on/off and Left/Right Balance. 7. Press or Button on the remote control to go to the next or previous track. Press and hold while track is playing for high speedforward or reverse music search of the current track. 8. To turn off the unit, press the Button. An iPhone/iPod will continue charging while docked. Listening to Radio Setting up Antenna Extend FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas. For USA user, snap AM antenna cable into AM Loop Antenna Socket on back of unit. Move antenna 12” away from unit for best reception. Tuning and Playing the Radio 1. Press the Radio Button as needed to turn on iP88 and cycle through FM radio, AM radio and Line-in modes. 2. When the desired FM or AM mode is selected, turn the Set Wheel to tune the radio to a desired station. The current radio frequency appears in the lower right of the display. You can also press and hold the or Button on the remote to scan for the next clear station. 3. To memorize a station as a preset, use the Set Wheel to select your station. Press and hold the Preset Button until odd number presets flashes on display; press again for even number presets and allow to time-out. You will hear 2 beeps confirming the preset has been assigned. 4. To access a preset station, press the desired Preset Button once (for odd number presets) or twice (for even number presets). 5. Turn the Volume Wheel to adjust the system volume. 6. Press the EQ Button to select and turn the Set Wheel to set Treble, Bass,3D Sound on/off and Left/Right Balance. 7. To turn off the unit, press the Button. An iPhone/iPod will continue charging while docked. 4 Using the iP88 Using the Line-in Jack You can play any iPod without a docking port or other MP3 player or portable audio device through the iP88 via the Line-in Jack. 1. Plug one end of a s...