Votes - 4, Average rating: 4
(
)
)
|
manual abstract
Take complete control of your music and videos with the JBL On Stage 400P speaker dock. COMPATIBILITY The JBL On Stage 400P system is compatible with all docking versions of the iPod/iPhone. A stereo mini jack connection also allows you to enjoy high-quality audio from a variety of other devices, such as iPod shuffle, MP3 and CD players, desktop computers (all platforms), satellite radio and laptops. REMOTE Just a touch of the Volume controls increases or decreases the volume. Using the Navigation controls, browse songs and photos, change tracks and settings, and more. With the JBL On Stage 400P remote, you have complete control of your iPod/iPhone, as though it were in your hand. EVERCHARGE TOPOLOGY The unit charges your iPod/iPhone, even when not connected to the computer or when the system is off. COMPACT DESIGN The JBL On Stage 400P loudspeaker dock is a complete 2.1-channel audio system, in one easy-to-place footprint. DIGITAL POWER AND DSP The system delivers sound with a powerfully tuned digital audio path. The clean and compact digital amplification, coupled with DSP (digital signal processing) equalization, efficiently provides the transducers with cool-running power. JBL ON STAGE 400P USER GUIDE English English UNPACKING YOUR JBL ON STAGE™* 400P Carefully unpack your speaker system and identify all its components: JBL MENU JBL On Stage™* 400P Adapters for IR remote Power supply Audio cable iPhone and iPod QUICK SETUP INSTRUCTIONS • Plug the barrel end of the power supply cord into the power jack and plug the other end into the wall. • Next, push the power switch; a green LED will light up, indicating that the unit is powered. • Find the correct adapter for your iPod/iPhone, then firmly place it into the docking area shown. • Next, place your iPod/iPhone into the dock, making sure your iPod/iPhone is firmly seated. • Adjust the volume, using (+) to increase and (–) to decrease. Press both to mute the JBL On Stage 400P unit. Press either button to unmute. Power Jack Power DC-In Auxiliary Switch Port JBL Power Audio-In Power DC-In Audio-In WWW.JBL.COM SPECIFICATIONS JBL ON STAGE™* 400P Frequency Response: 40Hz – 20kHz Power Consumption: 55 Watts maximum JBL On Stage 400P Transducers: One Atlas™ (45mm) neodymium and four Odyssey® (25mm) Power: 1 x 30 Watts (woofer) 2 x 15 Watts (tweeters), at 1% THD Input Impedance: >10k Ohms Signal-to-Noise Ratio: >85dB Input Sensitivity: 250mV RMS for rated power output Power (USA/Canada): 120 Volts, 60Hz AC Power (Europe/UK): 220 – 240 Volts, 50Hz or 60Hz AC Power (Japan): 100 Volts, 50Hz or 60Hz AC Power (Australia): 240 Volts, 50Hz or 60Hz AC UL/CUL/CE-Approved Dimensions: 14-1/4" x 7-3/16" x 3-3/4" (W x D x H) (362mm x 183mm x 95mm) Weight: 3.8 lb (1.7kg) Power Supply Manufacturer: JBL, Inc. Power Supply Model: 700-0084 TROUBLESHOOTING SOUND QUALITY Symptom Possible Problem Solution Note No sound from the No power to the unit. JBL On Stage 400P unit. Incorrect source selection. Make sure the wall power outlet or power strip has power. Make sure all switches for the outlet/power strip are on and that all switches for the speaker system are on. Make sure the iPod/iPhone is properly docked or that the auxilary cable is properly connected to an external audio device. Turn up the volume. Check the system with a known good source, such as your iPod/ iPhone. Connect the Auxiliary Port cable to the headphone jack on your iPod/iPhone. Is the LED on? If not, power is not getting to your JBL On Stage 400P system; try the solutions shown. Sound comes from one iPod/iPhone or audio cable is Make sure the iPod/iPhone or Auxiliary If you are using a longer side/channel only. not seated properly. Port cable is seated all the way into the cable, make sure it’s a JBL On Stage 400P unit. 3.5mm mini-jack stereo male-to-male cable. Distortion (static, Noise may be caused Turn monitor off to see whether noise is crackling or by interference from a eliminated. Move JBL On Stage 400P unit’s hissing sounds). monitor, cell phone or cables farther away from monitor. other transmitting device. Too much bass JBL On Stage 400P is being or treble. overdriven by an amplified audio source. Volume level may be too high. Check the EQ setting on your iPod/iPhone or source device. Make sure that the JBL On Stage 400P unit is connected to an appropriate source device. Make sure all signal cables are inserted snugly into receptacles. Check volume of source device. Some devices will distort the output signal if the volume is set to Maximum. It is recommended that the source device EQ be set to Flat or Off. JBL On Stage 400P unit emits a loud hum or buzzing noise. Input cables are not plugged in properly. Check input cable connection. Speaker system experiences radio frequency interference or picks up a radio station. Input cable may be picking up interference. Wrap up excess input cable, in order to make it as short as possible. Error message: “Device is not iPhone Compatible” is displayed on iPhone af...