Votes - 1, Average rating: 4
(
)
)
|
manual abstract
The set enters Installation Mode . The search for Center star ts. On Center 5 Press STOP/C on the Center when all the stations are found IMPORTANT! – Avoid thick walls. Your Center and Station should never be blocked by 2 or more walls. – Avoid placing the sets close to large metal objects. – Adjust the location of your Center and Station according to the reception status of Wi-Fi signals. – indicates maximum reception – indicates minmum reception – WACS700 do not support range expander devices If there is interference from neighborhood, such as the pause during playback, the sets’ slow response to your operation – Keep the Center or Station at least 3 meters away from microwave ovens, DECT phones, bluetooth devices (e.g. headphones, a computer mouse), wireless access points (e.g. routers), cordless phones, Wi-Fi compatible printers and PDAs, etc.. – Use the WEP* key when connecting your Center and Station to an existing wireless PC network. See the manual Connect to your PC – Change the operating channel of your Center and Station when connecting them to an existing wireless PC network.To learn about how to change channels, see the manual Connect to your PC – If possible, change the operating channels of the other Wi-Fi devices at your home. – Turn the above devices in different directions to minimize interference. * stands for Wired Equivalent Privacy. It is a security protocol for wireless local area network Deleting a station 1 Switch on WAC700 Center and select HD source 2 To select Delete Station on Center a. Press MENU. b. Use the navigation controls 3 or 4 and 2 to enter Station Mgnt menu c. In Station Mgnt menu, use the navigation controls 3 or 4 and 2 to select . On the Center ‘s display shows the list of connected stations 3 Press 3 or 4 and 2 to select the station you wish to delete 4 Press 3 or 4 and 2 to select Yes 16 Preparation English – Some functional keys on Center’s remote Using the remote control control are exclusively used for Center (for WAS700 is equipped with a remote control. example, CD/MP3-CD, MARK/UNMARK, You can use it to operate both Center and MUSIC BROADCAST etc.) Station. IMPORTANT! – Remove the protective plastic tab before using the Station’s remote control. To replace the remote controls’ battery 1 Press and hold 1 as indicated. – Always point the remote 2 Simultaneously, pull the batter y tray at 4. control directly towards IR area on the 3 Remove the old battery and put a new CR2025 Center or Station you wish to operate. battery in place. 4 Put back the battery tray. Using Center’s remote control By default, Center’s remote control works with Center only.To operate Station using Center’s remote control, 1 Press and hold REFRESH until the select screen appears on the display of Center’s remote control. 2 1 . 3 CR2025LITHIUM CAUTION! – Remove the battery if it is exhausted or will not be used for a long time. – Batteries contain chemical substances, so they should be disposed of properly. Using the navigation controls When selecting options on the set’s screen, you often need to use the navigation controls 1 / 2 / 3 / 4. 1 Press 3 / 4 to highlight an option. 2 Enter its submenu by pressing 2. 3 Press 1 to return to the previous option list screen. 4 Press OK or 2 to confirm 2Press the navigation controls 3 or 4 and 2 to select Station On Center’s remote control: . Display shows current status of Station after Station is connected . You can use Center’s remote control to operate Station now Helpful hints: – To operate Center using the remote control again, repeat the above steps 1-2 to select Center. IMPORTANT! – Center’s remote control will return to its default setting (works with Center only) when you insert new batteries into it. – Avoid placing your Center or Station close to the plasma TV. It may resuit in improper display on your Center’s remote control. 17 Basic functions English Switching to standby/on and selecting functions 1 When the set is on, press STANDBY-ON/ ECO POWER to switch it to standby (or y on the remote control) . The screen dims out. Display shows Center Status screen and the number of centers found . The Center Status screen is empty if no center is found 2 To switch on, press STANDBY-ON/ ECO POWER on the set . The set switches to the last source selected. OR On the remote control, press the source button (e.g. Tuner/Aux, Center). 3 To select your function, press SOURCE once or more on the set (or Center, Tuner/Aux on the remote control) Switching to Eco power/ on In the power-saving Eco power mode, the set’s display and Wi-Fi connection are turned off. 1 When the set is on, press and hold STANDBYON/ ECO POWER to switch it to Eco power (or y on the remote control). . The display is switched off. 2 To switch on, press and hold STANDBY-ON/ ECO POWER (or y on the remote control) or press and hold SOURCE on the set . The set switches to the last source selected. Helpful hints: – In the standby/Eco power mode, the settings of networking, sound, displ...