Votes - 0, Average rating: 0
(
)
)
|
manual abstract
– Some functional keys on Center’s remote control are exclusively used for Center (for example, CD/MP3-CD, MARK/UNMARK, MUSIC BROADCAST etc.) Preparation Center’s remote control: 1 Open the batter y compartment. 132 2 Inser t 4 batteries type R03 or AAA into the remote control with the correct polarity as indicated by the "+" and "-" symbols inside the batter y compartment CAUTION! – Remove batteries if they are exhausted or will not be used for a long time. – Do not use old and new or different types of batteries in combination. – Batteries contain chemical substances, so they should be disposed of properly. Using Center’s remote control Battery usage: As a remote control with synchronous display, Center’s remote control consumes more power than normal remote controls. When its batteries are low or empty, the icon appears on the remote control’s display. Replace the batteries with new alkaline batteries. By default, Center’s remote control works with Center only. To operate Station using Center’s remote control 1 Press and hold REFRESH until the selection screen appears on the display of Center’s remote control. 2Press the navigation controls 3 or 4 and 2 to select Station 3Put back the compar tment door On Center’s remote control: . Display shows current status of Station after Station is connected . You can use Center’s remote control to operate Station now. 17 Preparation English Helpful hints: – To operate Center using the remote control again, repeat the above steps 1-2 to select Center. – Center’s remote control will return to its default setting (works with Center only) when you insert new batteries into it. Using the display on the Center’s remote control You can synchronize the local display of your Center or Station onto the display of Center’s 2way remote control. With the synchronized display, your operation of remote control becomes quicker and easier. Note: –Avoid placing your Center or Station close to the plasma TV. It may interfere with the Center’s remote control and cause improper display on your Center’s remote control. In this case, turn off your plasma TV or use Station’s remote control. – If you switch on your Center or Station using the STANDBY-ON/ ECO POWER button on the set, press REFRESH on Center’s remote control to synchronize the remote control’s display. – The display supports 6 European languages: English, French, Spanish, Dutch, Italian and German. Using the navigation controls When selecting options on the set’s screen, you often need to use the navigation controls 1 / 2 / 3 / 4. 1 Press 3 / 4 to highlight an option 2 Enter its submenu by pressing 2 3 Press 1 to return to the previous option list screen 4 Press OK or 2 to confirm 18 Basic functions English Switching to standby/on and selecting functions 1 When the set is on, press STANDBY-ON/ ECO POWER to switch it to standby (or y on the remote control) . Display shows GoodBye .The Red indicator lights up . The screen dims out. Display shows Station Status screen and the number of stations found 2 To switch on, press STANDBY-ON/ ECO POWER on the set . The set switches to the last source selected . The Green indicator lights up . You can also switch on the set by pressing the source button on Center’s remote control (e.g. HARDDISK, CD/MP3-CD, AUX) 3 To select Center’s function, press SOURCE once or more on the set (or HARDDISK, CD/ MP3-CD, AUX on the remote control) STANDBY-ON Switching to power-saving mode In the power-saving Eco power mode, the set’s display and Wi-Fi connection are turned off. The Center’s harddisk also stops working. When you switch Center to Eco power, it is impossible to move music between Center and Station or import music from PC to Center. 1 When the set is on, press and hold STANDBYON/ ECO POWER to switch it to Eco power (or y on the remote control). . The display is switched off . The Red indicator lights up 2 To switch on, press and hold STANDBY-ON/ ECO POWER (or y on the remote control) or press and hold SOURCE on the set . The set switches to the last source selected Helpful hints: – In the standby/Eco power mode, the settings of networking, display and language will be retained in the set’s memory. – To protect the hard disk, always switch Center to standby/ECO POWER before removing its power plug from the wall outlet. ECO POWER Auto-standby . When the set has reached the end of playback/ recording and remains in the stop position for more than 5 minutes, the set will switch to standby automatically to save power. 19 Basic functions English Switching the blue indicator on/ off The blue indicator lights up when the set is switched on. . On the remote control, press and hold DIM to turn the brightness on or off. SAME ARTIST SMART EQSMART EQ Display adjustment You can adjust the display’s backlight and contrast settings. 1 Press and hold STOP • MENU to enter the MENU screen (or on remote control, press MENU). 2 Use the navigation controls 3 or 4 and 2 to select Settings. 3 Press 3 or 4 and 2 to...