Votes - , Average rating:
(
)
)
Manafacture: Philips
File size: 960.12 kb
File name:
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
manual abstract
LINE OUT DC (for illustration only) 14 Preparation English Using the remote control IMPORTANT! – Remove the protective plastic tab before using the Station’s remote control. –Always point the remote control directly towards IR area . To replace the battery 1 Press and hold 1 as indicated 2 Simultaneously, pull the battery tray at 4 3 Remove the old battery and put a new CR2025 batter y in place 4 Put back the batter y tray Using the navigation controls When selecting options on the set’s screen, you often need to use the navigation controls 1 / 2 / 3 / 4. 1 Press 3 / 4 to highlight an option 2 Enter its submenu by pressing 2 3 Press 1 to return to the previous option list screen 4 Press OK or 2 to confirm 2 1 . 3 CR2025LITHIUM CAUTION! – Remove the battery if it is exhausted or will not be used for a long time. – Batteries contain chemical substances, so they should be disposed of properly. 15 Basic functions English Switching to standby/on 1 When the set is on, press STANDBY-ON/ ECO POWER to switch it to standby (or y on the remote control) . Display shows GoodBye .The Red indicator lights up . Center: The screen dims out. Display shows Station Status screen and the number of stations found . Station: Display shows Center Status screen and the number of centers found . The Center Status screen is empty if no center is found 2 To switch on, press STANDBY-ON/ ECO POWER (or y on the remote control) . The set switches to the last source selected . The Green indicator lights up Switching to power-saving mode In the power-saving Eco power mode, the set’s display and Wi-Fi connection are turned off. 1 When the set is on, press and hold STANDBYON/ ECO POWER to switch it to Eco power (or y on the remote control). . The display is switched off . The Red indicator lights up 2 To switch on, press and hold STANDBY-ON/ ECO POWER (or y on the remote control) . The set switches to the last source selected Helpful hints: – In the standby/Eco power mode, the settings of networking, display and language will be retained in the set’s memory. Auto-standby . When the set has reached the end of playback/ recording and remains in the stop position for more than 5 minutes, the set will switch to standby automatically to save power. Switching the blue indicator on/ off The blue indicator lights up when the set is switched on. . On the remote control, press and hold DIM to turn the brightness on or off. 16 Basic functions Display adjustment You can adjust the display’s backlight and contrast settings. 1 On the remote control, press MENU. 2 Use the navigation controls 3 or 4 and 2 to select Settings. 3 Press 3 or 4 and 2 to select Display. 4 Press 1 / 2 / 3 / 4 to select your options: Selecting languages 1 On remote control, press MENU 2 Use the navigation controls 3 or 4 and 2 to select Settings 3 Use the navigation controls 3 or 4 and 2 to select Language 4 Press 3 or 4 and 2 to select: English, French, Spanish, Dutch, Italian and German. English Backlight: Press 3 or 4 and 2 to select on or off ; . You can also turn the backlight on or off by pressing DIM on the remote control Contrast: Press 1 / 2 to reduce or enlarge the contrast. 17 HD UPnP English On WAC5 Center is located a 80GB hard disk, where music is centrally stored. Via Wi-Fi, all the stored music can be streamed and played on Station. For the details on how to use WAS5 Station together with Wireless Music Center, see the user manual for WACS5. UPnP After connecting your WAS5 to an existing network, you can set up a UPnP* ser ver in the network. Play from your WAS5 stations the music collection either on the Center or on the UPnP server. * Univeral Plug and Play (UPnPTM) builds on standard networking technologies and provides standardized protocols for a wide variety of home and small business devices. It allows easy interoperability of all the devices suppor ting the the networking technologies. Requirements for the UPnP server: . The UPnP device has been connected to the same network as WAS5. . UPnP ser ver software is installed (e.g. Philips Media Manager, Musicmatch® ) and the UPnP ser ver function is enabled. – With Philips Media Manager, the UPnP server function is enabled by default. To connect a UPnP server If the WAS5 Station is now connected to Center, 1 Check the Center is switched on or to standby mode 2 Check your UPnP-enabled PC is switched on – Switch off your firewall 3 Switch on the Station 4 To select Select Server on Station a. On the remote control, press MENU b. Use the navigation controls 3 or 4 and 2 to select . The Station ‘s display shows the list of servers connected . Server not found appears if there is no UPnP ser ver in the network 5 Use the navigation controls 3 or 4 and 2 to select your desired ser ver . The Station ‘s display shows PC’s music as it does on PC If the WAS5 Station has ever been connected to Center, but is now disconnected from Center 1 Connect WAS5 to the power supply . Display shows: “Connecting to Center...” 18 UPnP SLEE...