Votes - 0, Average rating: 0
(
)
)
|
manual abstract
EN Load the iPod/iPhone/iPad 1 Lift the lid of the dock. 2 Load the iPod/iPhone/iPad onto the dock. 12 Listen to the iPod/iPhone/iPad 1 Load your iPod/iPhone/iPad. 2 Press the button DOCK on your RC . 3 Play the selected track on your iPod/ iPhone/iPad. • To pause/resume the play, press . • To stop the play, press . • To skip to the previous/next audio track, press / . Charge the iPod/iPhone/iPad When the unit is connected to power, the docked iPod/iPhone/iPad star ts charging. Tip • For cer tain iPod models, it may take up to a minute before the charging indication appears. Remove the iPod/iPhone/iPad 1 Unload the iPod/iPhone/iPad from the dock. 2 Flip down the lid to hide the dock. 7 Listen to FM radio Note • A maximum of 20 radio stations can be stored. • Fully extend the FM antenna for better reception. Program radio stations automatically 1 Press RADIO. 2 Press and hold PROGRAM for 2 seconds. » AUTO appears. » Available stations are stored automatically. » The first programmed radio station is broadcast automatically. Program radio stations manually 1 Press RADIO. 2 Long press / to search to a radio station, or press / to manually tune to a radio station. 3 Press PROGRAM to program the current station . » The sequence number blinks with the current frequency displayed. 4 Press / to allocate a sequence number from 01 to 20 to this radio station. 5 Press PROGRAM to confirm. » The sequence number and the current frequency are displayed. 6 Repeat steps 2-5 to program more stations. Tip • To over write a programmed station, store another station with its sequence number. • [STEREO] is default setting for tuner mode. • Under tuner mode, you can press OK repeatedly to toggle between [STEREO] and [MONO], and the unit memorizes your setting even if you turn off the unit or turn to other sources. Tune to a programmed radio station 1 Press RADIO. 2 Press / repeatedly to select a programmed radio station. Show RDS information RDS (Radio Data System) is a ser vice that allows FM stations to show additional information. If you tune to an RDS station, an RDS icon and the station name are displayed. 1 Tune to an RDS station. 2 Press RDS/INFO repeatedly to scroll through the following information (if available): » Station name » Program type such as [NEWS] (news), [SPORT] (spor t), [POP M] (pop music)... » Frequency Synchronize clock with RDS station You can synchronize the clock time on the unit with an RDS station. 1 Tune to an RDS radio station that transmits time signals. 2 Press RDS/INFO for over 2 seconds. » [CT SYNC] is displayed and the unit reads RDS time automatically. » If no time signal is received, [NO CT] is displayed. Note • The accuracy of the transmitted time depends on the RDS station that transmits the time signal. EN 8 Setup 1 After you press the button SYSTEM MENU. » The system menu appears. Click the symbol to access each setup. Note • You cannot change a menu option that is grayed out. • To return to the previous menu, press . To exit the menu, press SYSTEM MENU again. General setup 1 Press SYSTEM MENU button. 2 Select to access the [General Setup] options. • [Disc Lock]: Turn Disc lock. • [Display Dim]: Change the brightness of the display panel of the unit. • [OSD Language]: Select an on-screen display menu language. • [Screen Saver]: Enable or disable screen saver mode. If enabled, the screen enters idle mode after 5 minutes of inactivity (for example, in pause or stop mode). • [Sleep Timer]: Enable a countdown timer to switch this unit to standby mode after a specific period of time. • [DivX(R) VOD Code]: Get registration code of DivX Video On Demand Registration. EN Note • If you select a language which is not available on a disc, this unit uses the default language of the disc. Audio Setup 1 Press SYSTEM MENU button. 2 Select to access the [Audio Setup] options. • [HDMI Audio]: Selects HDMI audio format when this unit is connected through HDMI or disables HDMI audio output for the T V. • [Audio Sync]: Set the delay time for audio output when you play a video disc. • [Night Mode]: Select quiet or full dynamic sound. Night mode decreases the volume of loud sound and increases the volume of soft sound (such as speech). Note • For settings related to HDMI, the T V must be connected through HDMI. • Night mode is only available for Dolby encoded DVD. Video Setup 1 Press SYSTEM MENU button. 2 Select to access the [Video Setup] options. • [T V Type]: Select video output format(PAL, Multi or NTSC). • [TV Display]: Set screen display format(Pan Scan, Letter Box or Wide Screen). • [Picture Settings]: Select a predefined color setting or set the color manually. • [HDMI Setup]: When you connect this unit and TV with HDMI cable, select the best HDMI setup that your T V can suppor t. Note • For settings related to HDMI, the TV must be connected through HDMI. • Night mode is only available for Dolby encoded DVD. Preference setup Update software Before you update the software of this unit, check the current...