Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Never pull the power cord. • Before you connect the AC power cord, ensure that you have completed all other connections. 1 Connect the power cord to: • the AC~ socket on the main unit. • the power outlet. Prepare the remote control Caution • Risk of explosion! Keep batteries away from heat, sunshine, or fire. Never discard batteries in fire. To insert the remote control battery: 1 Open the battery compartment. 2 Insert 2 AAA batteries with correct polarity (+/-) as indicated. 3 Close the battery compartment. R R LINE OUT AUX IN L L DEMO ANTENNA FM For the speaker side: 1 Unscrew the speaker connectors. 2 For the left speaker, identify the speaker cable that is connected to the left connectors on the main unit. 3 Insert fully the red end of the speaker cable into the red (+) connector. 4 Screw the red (+) connector to secure the cable. 5 Insert fully the silver end of the speaker cable into the black (-) connector. 6 Screw the black (-) connector to secure the cable. 7 Repeat steps 2-6 for the right speaker. Connect FM antenna Tip • For optimal reception, fully extend and adjust the position of the antenna. • For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA socket. • The unit does not support MW radio reception. 1 Connect the supplied FM antenna to the FM ANTENNA socket on the main unit. R R LINE OUT AUX IN L L DEMO ANTENNA FM FM English EN a bcabc Note • If you are not going to use the remote control for a long time, remove the batteries. • Do not use old and new or different types of bat teries in combination. • Batteries contain chemical substances, so they should be disposed of properly. Set clock 1 In standby mode, press CLOCK for three seconds to activate clock setting mode. » [CLOCK SET] scrolls on the display, then the time format [24H] or [12H] is displayed. 2 Press VOL +/- to select 24H or 12H, then press CLOCK to confirm. » The hour digits begin to blink. 3 Press VOL +/- to set hour, then press CLOCK again. » The minute digits begin to blink. 4 Press VOL +/- to set minute. 5 Press CLOCK to confirm the clock setting. Note • If no button is pressed in 90 seconds, the system exits clock setting mode automatically. Demonstrate the unit’s features 1 In the standby mode, press until “DEMO ON” is displayed. » Available features are displayed one by one. • To turn off the demonstration, press again. Adjust brightness of display panel Press DIM repeatedly to select different brightness levels. Turn on or off LED light 1 In power-on mode, press and hold DIM to turn on or off the LED light at the bottom of the unit and at the volume knob. Turn on 1 Press . » The unit switches to the last selected source. Switch to standby mode To switch the system to Eco Power Standby mode: In standby mode, press and hold for 2 seconds. » [ECO POWER] (Eco power) scrolls on the display, then the backlight turns off. 12 EN 4 Play Basic play operations You can control play through following operations. Key Function / Press and hold to fast-for ward/fastreverse the track during playback, then release to resume play. To pause/resume play during playback. INFO Select different play information. REPEAT To select a repeat play mode: [REP] (repeat): play current track repeatedly. [REP ALL] (repeat all): play all tracks repeatedly. Press again to return to normal play. SHUFFLE To play tracks randomly. Press again to return to normal play. Play from disc 1 Press DISC to select the CD source. 2 Press . » The disc compar tment opens. 3 Place a disc with the printed side facing up, then press . 4 The unit star ts to play automatically. • If the play does not star t, press / to select a track, then press . Play from USB Warning • Make sure that the USB storage device contains playable audio contents for suppor tedformats. 1 Flip open the cover marked on the front panel. 2 Inser t the USB storage device into the USB socket. 3 Press USB to select the USB source. » Play star ts automatically. If not, press ALBUM/ to select a folder and / to select a file. System star ts to play automatically. English EN 13 Adjust sound During play, you can change volume through following operations. Key Function VOL +/-To increase/decrease the volume. To mute/res tore sound. LOUDNESS To turn on/off automatic loudness control. BASS To activate bass, press BASS and then change the bass level with VOL +/-. TREBLE To activate treble, press TREBLE and then change the treble level with VOL +/-. 5 Listen to FM radio Plug and play installation When the unit turn to radio mode, and no radio stations are stored, [AUTO INSTALL -- PRESS PLAY -- STOP CANCEL] (to auto install, press ; to cancel, press ) displays. 1 Press on the main unit to star t installation. » The unit automatically stores radio stations with sufficient signal strength. » When all the available radio stations are stored, the first preset radio station broadcasts automatically. 2 To exit plug and play installation mode, press source keys or on the remote control. » The syst...