|
manual abstract
• Music (especially classical music) is best enjoyed in a room that produces some echo. Positioning the speaker (for SS-V811ED/V701 only) (C) Attach the speaker to supplied speaker stand and place it at their optimum locations. For details on the location of the speaker, see “Location of each speaker.” 1 Detach the plate from the stand. 2 Pass the speaker cord into the hole on the back of the stand and out from the hole at the center of the stand. 3 Separate the speaker cord, then secure the cord to the speaker stand with the plate. 4 Connect the speaker cord to the speaker terminal. The cord should be pressed into the groove in the stand. 5 Using the supplied screws and washers, secure the speaker to the stand. Note Do not remove the supplied speaker grille from the speaker while attaching the speaker to the speaker stand. Setting the speaker (for SS-V521 only) (D) To prevent speaker vibration or movement while listening, attach the supplied foot pads to the speaker. Specifications SS-V811ED (SS-MS815) Speaker system 2 way, magnetically shielded Speaker units Tweeter: 1.9 cm, dome type Woofer: 5 cm . 2, balanced drive type Enclosure type Bass reflex Rated impedance 8 ohms Power handling capacity Maximum input power: 140 W Sensitivity level 87 dB (1 W, 1 m) Frequency range 120 Hz - 70,000 Hz Dimensions (w/h/d) When attached speaker grille: Approx. 86 . 169 . 130 mm When attached to supplied speaker stand: Approx. 96 . 207 . 141 mm Mass When attached speaker grille: Approx. 1.3 kg When attached to supplied speaker stand: Approx. 1.4 kg SS-V701 (SS-MS7) Speaker system 2 way, magnetically shielded Speaker units Tweeter: 1.9 cm, dome type Woofer: 5 cm . 2, balanced drive type Enclosure type Bass reflex Rated impedance 8 ohms Power handling capacity Maximum input power: 140 W Sensitivity level 87 dB (1 W, 1 m) Frequency range 120 Hz - 40,000 Hz Dimensions (w/h/d) When attached speaker grilles: Approx. 86 . 169 . 130 mm When attached to supplied speaker stand: Approx. 96 . 207 . 141 mm Mass When attached speaker grilles: Approx. 1.3 kg When attached to supplied speaker stand: Approx. 1.4 kg SS-V521 (SS-MS525) Speaker system Full range . 2, magnetically shielded Speaker units 5 cm, balance drive type Enclosure type Bass reflex Rated impedance 8 ohms Power handling capacity Maximum input power: 120 watts Sensitivity level 87 dB (1 W, 1 m) Frequency range 120 Hz - 20,000 Hz Dimensions (w/h/d) Approx. 89 . 144 . 130 mm, including front grille Mass Approx. 750 g Supplied accessories Speaker stand (1) (SS-V811ED/V701 only) Screws (2) (SS-V811ED/V701 only) Washers (2) (SS-V811ED/V701 only) Plate (1) (SS-V811ED/V701 only) Foot pads (4) (SS-V521 only) Speaker connecting cords, 10 m (1) Design and specifications are subject to change without notice. Fonctions Les instructions de ce manuel concernent le haut-parleur Sony Micro Satellite Speaker SS-V811ED, SS-V701 et SSV521. Si vous ajoutez ce haut-parleur aux systemes SAVE815ED, SA-VE705 et SA-VE525, vous benefic...
Other models in this manual:Speakers & Subwoofers - SS-V701 (107.57 kb)
Speakers & Subwoofers - SS-V811ED (107.57 kb)