Votes - 4, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
4. Press the button on the top panel of the Wireless Audio with Dock repeatedly until the or icon appears in the display. • Each time you press the button, the selection changes as follows : ; ; ; ; ; ; aUX (LeD Off) 5. The or indicator lights up in red, and changes to solid white once the Wireless Audio with Dock connects to the router. . If you connected the LAN cable when the product is on, turn the product off, then turn it on again. . If failed to connect to the network, unplug the LAN cable and connect it again, and restart the product. . xDSL user needs a router to make a network connection. to connect the Wireless Audio with Dock to a Wireless network This section describes 4 methods of connecting the Wireless Audio with Dock to a wireless network. . Some of network related operations may be different than explained depending on performance and supported functions of used AP. . To configure the network connection to your router or modem, see the router or modem's user manual. . The Wireless Audio with Dock supports the following security protocols: -WEP ; Open -WPA-PSK ; TKIP -WPA2-PSK ; AES . You can also connect the Wireless Audio with Dock to a network that does not have security and has no password. . If your wireless router supports DHCP, this Wireless Audio with Dock can use a DHCP or static IP address to connect to the wireless network. . Select a channel on the wireless router that is not currently being used, if the channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure. . If you select the Pure High-throughput (Greenfield) 802.11n mode and set the encryption type on your router to WEP or TKIP, then the Wireless Audio with Dock will not support a connection in compliance with new Wi-Fi certification specifications. . Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance, distance, obstacles, interference with other radio devices, etc) . WPS(PBC) / WPS(PIN) does not operate when the security protocol is set to WEP. . If you fail to set up the network, press and hold the WPS/reSet button on the rear panel until the or indicator blinks twice. Wait until the red light stops blinking, turn off and on the unit. And try again. to connect the Wireless Audio with Dock to your Apple device having iOS 5.0 or above (info Sharing) This network set-up method is for users of Apple devices that have iOS 5.0 or later. 1. Connect the Apple device to your network. 2. Select on the Wireless Audio with Dock, and then connect the iPod /iPhone /iPad device to the Dual Dock. 3. Press and hold the WPS/reSet button on the rear panel of the Wireless Audio with Dock with a pen tip or similar item for more than 1 second. The icon will blink once. Release the buttom. 4. Select
Speakers & Subwoofers - DA-E751 (9.41 mb)