Votes - 3, Average rating: 4
(
)
)
|
manual abstract
If you have already docked your iPod, press the Audio button on the top of the unit and click through AUX/RADIO/IPOD audio modes until you have reached the desired audio mode. If there is not an iPod docked, press the Audio button on the top of the unit to choose between AUX or RADIO modes. Setting the Time: Press the Time Set button located on the top of the unit to select the Hour/Minute settings. Then spin the set +/- wheel to adjust the hour and minute setting. Operating the GrooveRise cont. 6 Operating the GrooveRise Alarm and Alarm Mode Setting: Press the Al1/Al2 button to enable alarm 1, alarm 2 or both. Once you have enabled at least one alarm, press the Al Set button. Use the Al Set button to switch between the hours and minutes to set the alarm time. Then use the Set +/- wheel to adjust the hours or minutes desired. Set each alarm separately. After you have set the alarm(s) press Al Mode to switch between AUX/RADIO/IPOD as the alarm type. To set to volume of the alarm – see “Volume Setting” section. The alarm will sound every day at the set time(s). After the alarm has gone off, it can be turned off until the next day by pushing any button except the Snooze/Nap button. Operating the GrooveRise cont. 7 Operating the GrooveRise Snooze/Nap Mode Setting: Press the Snooze/Nap button on the top of the unit after the alarm has gone off. The alarm will turn off temporarily and will go off again after 9 minutes approximately. You may use this feature until you turn the alarm off. Sleep Mode Setting: The sleep mode allows you to set the unit to turn off after a certain amount of time (15/30/45/60 minutes). Press the Sleep button on the top of the unit and the display will cycle through 15/30/45/60 minutes time options. Select the time you desire and the GrooveRise will turn off after the desired sleep time selected. 8 Operating the GrooveRise cont. Operating the GrooveRise Tuning the Radio: When in Radio mode, use the Set+/- wheel to adjust to the FM frequency you want. Volume Setting: The Default volume setting is 20dB (min volume is 0dB and max volume is 40dB). To increase the volume, spin the Volume wheel clockwise. To decrease the volume spin the Volume wheel anti-clockwise. To set the Volume of the alarm, simply adjust the volume to the desired level using the Volume wheel before pushing the Power button Off on the unit. The alarm will sound at the volume level selected prior to turning the unit off. Setting the Back light: The back light has three settings: OFF, DIM and BRIGHT. The backlight can be switched on when the unit is powered on or off by pushing the Dimmer button to cycle through OFF, DIM and BRIGHT modes. 9 GrooveRise Remote Control Remote Control standby mute source memory al1/al2 time set alm mode alm set menu enter sleep volume – snooze / dimmer volume + standby: power on/off. mute: Mute or un-mute speaker source: Ipod/radio/Aux audio source selection memory: preset radio station al1/al2: activates alarms 1 or 2 time set: sets...
Other models in this manual:Speakers & Subwoofers - iPod Speaker (89.59 kb)
Speakers & Subwoofers - iPod Speaker (89.59 kb)