Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
This compact system features high sensitivity, high-output capability and point-source alignment, together with excellent directivity control down to 1,000 Hz. The coverage at 1,000 Hz is 110° horizontal by 100° vertical, and the system’s nominal coverage is 90° horizontal by 90° vertical. The bass-reflex porting extends the low-frequency response to below 80 Hz or lower if multiple units are used. The DTS200PI consists of a 305-mm (12.0-inch) high-power, low-frequency driver with a coaxially mounted 25.4-mm (1-inch) compression driver utilizing a 90° x 90°constant-directivity horn. Electrical connection to the driver is made by a parallel, 4-pin Neutrik Speakon® connector7. The system is provided with a 1,500-Hz passive crossover featuring tweeter protection. The enclosure is injection molded from white high-impact polypropylene and lined with sound-absorbing polyester fill. Threaded 8-mm insert mounting points are provided to conveniently attach the Altec Lansing MblOO, Mb200, Mb200W, Mb300W or Mb300 suspension kits6. The system may then be hung as a single unit or as part of a cluster. The finish of the enclosure is black textured. The grille is full-face, foam-backed, black powder-coated metal and is fastened to the front of the enclosure with screws. A100-watt transformer version (DTS200PIX) is also available. The DTS200PIX consists of the same components as the DTS200PI with the addition of a 100-watts transformer installed internally. Architects’ And Engineers’ Specifications The loudspeaker system shall be of the vented-bass type, consisting of one, 305-mm (12.0-inch) high-power, Duplex® loudspeaker with a coaxially mounted 25.4-mm (1-inch) compression driver loaded with a Vari-Intense® 90° x 90° constant-directivity horn. The loudspeaker system shall meet the following performance criteria. Power handling shall be 200 watts of pink noise with a 6-dB crest factor, band-limited from 80 Hz to 20 kHz. Frequency response shall be smooth and uniformly usable from 80 Hz to 20 kHz. Pressure sensitivity shall be 100 dB SPL when measured at one meter on axis with one watt of band-limited pink noise from 80 Hz to 20 kHz. The enclosure shall be constructed of black, high-impact polypropylene and shall be heavily braced and lined with sound-absorbing polyester fill. The finish of the enclosure shall be textured, and a full-face, foam-backed, removable black grille shall be provided. The dimensions of the enclosure shall be 587 mm (23.1 in.) high by 429 mm (16.9 in.) wide by 312 mm (12.3 in.) deep. The loudspeaker system shall be: 17.3 kg (38 lb) (nontransformer) and 21.3 kg (47 lb) (transformer). The loudspeaker systems shall be the Altec Lansing DTS200PI (nontransformer) and DTS200PIX (transformer). Uniform Limited Warranty Statement Altec Lansing products are guaranteed against malfunction due to defects in materials or workmanship for a specified period, as noted in the individual product-line statements) below, or in the individual product data sheet or owner’s manual, beginning with the date of original purchase. If such malfunction occurs during the specified period, the product will be repaired or replaced (at our option) without charge. The product will be returned to the customer prepaid. Exclusions and Limitations: The Limited Warranty does not apply to: (a) exterior finish or appearance; (b) certain specific items described in the individual product-line statements) below, or in the individual product data sheet or owner’s manual; (c) mal- Altec Lansing DTS200P1/DTS200PIX Duplex® Weather-Resistant Loudspeaker Systems Altec Lansing DTS200PI Duplex" Weather-Resistant Loudspeaker Systems function resulting from use or operation of the product other than as specified in the product data sheet or owner’s manual; (d) malfunction resulting from misuse or abuse of the product; or (e) malfunction occurring at any time after repairs have been made to the product by anyone other than EVI Audio Service or any of its authorized service representatives. Obtaining Warranty Service: To obtain warranty service, a customer must deliver the product, prepaid, to EVI Audio Service or any of its authorized service representatives together with proof of purchase of the product in the form of a bill of sale or receipted invoice. A list of authorized service representatives is available from EVI Audio Service at 10500 W. Reno Avenue, Oklahoma, OK 73127 (800/845-8727 or FAX 405/577-3274). Incidental and Consequential Damages Excluded: Product repair or replacement and return to the customer are the only remedies provided to the customer. Altec Lansing shall not be liable for any incidental or consequential damages including, without limitation, injury to persons or property or loss of use. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. Other Rights: This warranty gives you specific legal rights, and you may also...
Other models in this manual:Speakers & Subwoofers - DTS200PI (1.14 mb)