Votes - 3, Average rating: 4
(
)
)
|
manual abstract
Foam pad feet for speaker User manual 1a 1b 234 567 8 9 Features 3 i-X6 Features Front Panel Features 1. Tweeter: 1" Magnetically Shielded Natural Silk Dome 2. Woofer: 6.5" Magnetically Shielded Paper Cone 3. Enclosure: Hand-crafted wood enclosure provides insulation of the acoustic components delivering a stable and superior bass response. Designed with a custom- made interior, the enclosure minimises vibration for distortion free sound and clear audio reproduction. 1 2 3 Rear Panel Features 4. Power Indicator LED: Indicates whether the speakers power is turned 'ON'. 5. DC Out: When connected to the dock, this power cable allows your iPod to charge when docked. 6. Aux In: This port enables stereo audio connection between dock and speakers. 7. RCA Input: Used to connect signals from unbalanced, -10dBv devices. The white connector is for the Left input and the red connector is for the Right input. AC Select Power On Off Volume Line Input L R Output Aux in DC Out 100-120VAC 50/60Hz T2AL 220-240VAC 50/60Hz T1AL RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION Made in China Serial Number: Power Rating:70W 4 5 6 7 8 9 10 11 12 13 Designed & developed in Australia Made in China X6 Features 4 Rear Panel Features (continued) 8. Volume Control: The volume control allows you to set the output level of your i-X5 (Note: this function is independent of the iPod volume level). 9. Vent Port: This port aids in reproduction of very low frequencies by discharging frequencies below 55Hz. 10. 6.5mm Jack Output: Use the 5 metre speaker cable included to connect the left and right speakers through the 6.5mm jacks on the back of each speaker. 11. Power Switch: This switch turns the device on and off, The 'ON' position is marked with a white dot. 12. Power Receptacle: Accepts a detachable 3-circuit line cord in order to power the device. 13. Voltage-Select Switch: Provides 2 selections, 115VAC and 230VAC, and should be set to match the “house supply” (receptacle) voltage of the country or location in which the speaker is used. The 115V setting is correct for the USA, while the 230V setting is correct for most of the UK, Europe and Australia. This setting must be correct or damage to the speaker will occur. Installation 5 For your safety and for the optimum performance of the i-X6 speaker system, please read all safety precautions and follow the instructions carefully. Precautions Connections: Ensure that the i-X6 is switched 'off' before making any connections. Connect the RCA outputs of your i-X6 to the corresponding inputs on your computer sound card, portable music player, or other audio device. We recommend that you use the supplied cables (or cables of equal or higher quality) for all connections. Correct Power Operation: Since the i-X6 contains an amplifier, it must be connected to a power outlet using the detachable AC cable that is provided. Before connecting the power, please make sure that the On/Off switch is in the 'OFF' position. WARNING! Use of improper Voltage may result in hazardous conditions and/or damage the speaker components not covered by the products warranty. Connecting the Speakers Use the speaker wires (6.5mm jack audio cable) included with the i-X6 to connect the Left and Right speakers via the 6.5mm jacks on the back of each speaker. Connecting to a Computer Sound Card or Other Audio Output Device 1. Before connecting the i-X6 Speaker System, make sure the power from the computer or other output device has been turned off. The power to the i-X6 must also be turned off before connecting. 2. Plug the RCA cable to the corresponding connectors on your computer sound card, portable music player or audio device. You can also use the 3.5mm mini stereo cable to connect a secondary aud...
Other models in this manual:Speakers & Subwoofers - i-x6 (242.89 kb)
Speakers & Subwoofers - i-x6 (242.89 kb)