Precision ported, U-shaped 304 grade stainless steel burners rated at 25,000 BTU’s per burner offer powerful performance and control. The patented Smart Beam® grill light perfects grilling at night with a 50-watt halogen light integrated into the rotisserie motor that is capable of illuminating the entire grilling surface. Our patented Grease Management System® reduces flare-ups by effectively channeling oil and grease away from the flame while grilling. A 9-volt Battery Ignition insures safe an

patents pending using or servicing this unit. Keep this manual for future reference. If you have questions about assembly, operation, servicing or repair, please call Coleman at 1-800-835-3278 or TDD: 316-832-8707. In Canada call 1-800-387-6161. Contents Introduction 2 General Safety Information 2 Assembly 2 - 4 Instructions for Use 4 - 5 Notes 6 Replacement Parts 7 Warranty 8 Introduction Follow these instructions for assembly and read carefully, particularly the safety statements. The safety a

Keep away from house, garage, balconies, or eave overhangs. • Keep out of the reach of children. •Exercise the same care you would with an open fire. • Never leave unit unattended when hot or in use. •Completely extinguish fire before leaving. • Use gloves when handling or moving. Ashes can remain warm for a long time after extinguishing. • Dispose of cold ashes properly. • Do not modify in any way or use with parts not expressly approved by Coleman. Contact local authorities regarding possible

& foreign patents pending Fireplace/Charcoal Grill Model 5065-715 Introduction Your Coleman® RoadTrip® Fireplace/Grill is a versatile unit that functions as either a fireplace or a charcoal grill. Follow these instructions for assembly and read carefully, particularly the safety statements. The safety alert symbol, is a universally recognized symbol used to identify safety information about hazards that can result in personal injury. When this symbol is used you should pay very close attention t

2. Insert Telescoping Legs into Receptors with spring clips inside legs. Important: Orient legs so small tube welded to leg faces inward. This will ensure proper fit of the Wire Brace. Legs extend by pushing in on both spring clips protruding from the legs and pulling the legs outward. Then lock leg in place by aligning spring clips with holes in legs. Always be sure spring clip is protruding through holes in legs to ensure stability. Small tubes must face inward Spring Clip Telescoping Leg Rece

WARNING • This Liquid Propane conversion Kit must be installed only by a qualified service technician. • Gas supply system must be installed in accordance with the U.S. National Fuel Gas Code. • This appliance and its individual shut off valve must be disconnected from the gas supply piping system during any system pressure test in excess of 1/2 PSI (3.5 KPA). • Use a system manual shut off valve to shut off the gas supply to this gas appliance before continuing with installation procedures. Not

Operation DANGER• EXPLOSION - FIRE HAZARD • Propane is heavier than air and can accumulate in low places. If you smell gas, leave the area immediately. • Always attach or detach propane source outdoors; never while skillet is lighted, near flame, pilot lights, other ignition sources or while skillet is hot to touch. • This skillet is red hot during use and can ignite flammables too close to the burners. Minimum distance from sides and back of unit to walls or railings is 12 inches (30.5 cm). Do

16). 20. Reattach the control knobs onto the manifold stems, making sure the arrow is facing upwards (See Fig. 11 on previous page). 21. Reinstall burners into the grill body. Line up the Fig 17 burners with the valves on the manifold, making sure they are level (Fig. 17 & 18). 22. Reattach the electrode and their heat shields to the burners (Fig. 2, 3, and 4). 23. Reattach the rear heat shield before attaching the front heat shield to be sure the burners remain over the valves (Fig. 19). Fig 18

A certified plumber must make connection to gas source. All codes must be followed. IMPORTANT Read this document carefully before attempting installation of this conversion kit. These instructions should be left with the consumer for future reference. WARNING • This Natural Gas conversion Kit must be installed only by a qualified service technician. • Gas supply system must be installed in accordance with the U.S. National Fuel Gas Code. • This appliance and its individual shut off valve must be

® ® INSTASTART™ Electronic Ignition Allumage electronique Encendido electronico Standard Ignition Allumage standard Encendido estandar 9924 Series ANSI Z21.89a-2006/CSA 1.18a-2006 Outdoor Cooking Specialty Gas Appliances Appareil special de cuisson a gaz pour l’exterieur Aparato Especial De Gas Para Cocinar Al Aire Libre Patent Pending Brevet en instance Patente Pendientes Propane Table Top Grill Gril de table a propane Parrilla de Mesa de Propano Instructions for use Notice d’emploi Instruccion