Votes - 2, Average rating: 3.5 ( )

Manafacture: Caldera File size: 271.01 kb File name: 6bf2849d-3c1d-4c64-8aba-6a599793856d.pdf Language of manual:

Unlocked mode When the gastop is in Unlocked mode (Lock LED is on) all keys are potentially active but the “Up” and “Down” keys are temporarily inactive unless a burner is in programming mode. During Unlocked mode the “Lock” LED under the Caldera logo is “on” solid, indicating that the burners can now be programmed. To Lock (Instant Off And Lock) To instantly turn off all burners or to lock the controls the Lock key must be touched and held for 2 seconds, then the LED beneath the Lock key, will shut off, all burners will turn off and the control will beep once to indicate that the unit is in Lock mode. When Locked, the keys cannot be activated and do not emit a beep, if touched. Automatic Locking And Deactivation The gastop will also lock automatically if no burners have been used for ten minutes. This feature may be deactivated by touching the lock key and the front left ON/OFF Key for 3 seconds while all burners are off. Two beeps acknowledges deactivation, one beep indicates reactivation. To Unlock While in Lock mode, to activate the gastop, the Lock key must be touched and held for 2 seconds. After a 1.5 second touch, the control will beep once and the LED beneath the Lock key will turn “On“ indicating that the burners can be programmed. Phone 800-725-7711 Fax 800-962-3072 9 Phone 800-725-7711 Fax 800-962-3072 10 Using A Burner Select a burner by touching its corresponding ON/OFF key. The ON/OFF keys are arranged to mirror the burner locations. The 8 segment LED will blink 'p' for program. Press the up or down arrow. If the down arrow is touched the burner will come on at level '4'. If the up arrow is pressed the burner will come on 'H' (high). You may then move to the desired setting using the up and down arrow keys.. The programming mode (blinking 'p')lasts for 10 seconds. Selecting A Power Level A brief touch to the control arrows will adjust the power by 1/2 increments (21 settings). This is indicated by a beep and circular LED to the right of the seven segment LED. A steady touch will scan through the eleven whole number settings. Settings L, 1 thru 3 1/2 are the simmer settings, your gas burner will cycle on and off for varying amounts of time depending on the setting. All settings of 4 and above produce a steady flame. Turning A Burner Off A brief touch to the appropriate burner's ON/OFF key will turn the burner off. You can turn all burners off at the same time by touching the lock icon for 1 1/2 seconds. Power failure In case of a power failure your unit will not operate. It will "fail / safe". Each burner and the overall safety valve will shut the flow of gas of automatically. Flame height and Appearance Yellow Flame, call your gas company for service. Yellow tipped blue flame, normal for L.P. Soft blue flame, normal for natural gas. Grates And Burner Caps Grates and burner caps may be washed with hot soapy water or placed in the dishwasher. If needed, mild abrasives may be used. Allow grates and caps to dry well before replacing them. Use care replacing the burner caps so as not to damage the thermocouple and the hot wire igniter. Warranty Two Year Parts and Labor Five Year Parts Full Two Year Warranty: For two years from the date of original purchase, we will pay for parts and labor to repair or replace any part of your gastop that has failed due to a manufacturing defect. Five Year Parts Warranty: For an additional three years after the Full Two Year Warranty, Caldera agrees to provide any parts necessary for the repair of your unit due to a manufacturing defect. You will be responsible for the labor charges. This warranty does not cover damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification to any part of the product. This warranty does not cover damage due to improper operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than an authorized Caldera repair service. This warranty is valid only in the United States. This warranty is invalid if the factory applied serial number has been altered or removed from the product. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. CALDERA CORPORATION SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS...

Download now

Please, enter two numbers from picture: