2 Select the channel of the DTV program you wish to record. (Refer to steps 2 to 5 on pages 78 to 81.) 3 Press MENU and select SET UP by using the5or°button and then pressing SET/ ENTER. (Refer to page 26.) 4 Select DTV OUT in the same way. 23°5 SET/ ENTER EX I T USE: END: MENU SET UP CHANNEL SET UP CONVERGENC DPO:OFF SYSTEM I N / E OUT PROGRAM BLOCK CHANGE PASSWORD DTV OUT : OFF SET/ ENTER 5 Set DTV OUT to ON. 23ENTERSET/ 5° SET/ ENTER NOTES: • The DTV OUT settings screen is displayed when an SH-D09 digital tuner is connected. ON OFF EX I T USE: END: MENU SET UP CHANNEL SET UP CONVERGENC DPO : E DTV OUT : SYSTEM I N / OUT PROGRAM BLOCK CHANGE PASSWORD OFF • Turning DTV OUT ON will make it impossible to change DTV channels. DTV OUT must be turned After setting, press MENU to turn the 6 OFF in order to change channels. · When the DTV OUT is turned to ON, the MONITOR/ menu off. DTV OUTPUT jack becomes the DTV specialized output jack and an NTSC signal is output. Also note that the monitor picture quality will be equivalent Signals will then be output from the 7 to the picture quality described on NTSC. · Turning the power to the Projection Monitor off will MONITOR/DTV OUTPUT jack. Turn on cause signals to no longer be output from the MONITOR/DTV OUTPUT jack, and you should the power to your VCR and then begin accordingly be careful not to turn off the power while recording. recording. • It the power to the Projection Monitor is turned OFF then ON when DTV OUT is ON, DTV OUT turns OFF. • When DTV OUT is turned to ON, the channel change, multi-screen (SPLIT, FREEZE, SEARCH screen) and screen position (V. POSITION) functions cannot be used. 83 OTHERS 84 INPUT INPUT 1 INPUT 1 INPUT 2 INPUTS OUTPUT CENTER INPUT INPUT 3 VIDEO S-VIDEO VIDEO AUDIO AUDIO FIXED/VAR AUDIO COMPONENT VIDEO (MONO) L R L R ANTENNA /CABLE A B OUTPUTS MONITOR TV /DTV Y PB PR INPUT 3 SELECT S-VIDEO/VIDEO RGB CONTROL IN OUT INPUT 3 INPUT RGB AIR CABLE AUDIO VIDEO R L INPUT 1 V R L CENTER OUT MONITOR OUT VCR V R L DIGITAL DVD/LD player Speaker VCR SAT tuner Speaker Dolby Digital receiver Rear panel Digital tuner SIGNAL SIGNAL SIGNAL SIGNAL SIGNAL Mixer CATV converter Splitter Splitter INPUT 2 ANTENNA AUDIO-OUT DIGITAL DOLBY D I G I T A L Connect the VHF/UHF signal to the digital tuner. CONNECTION WITH RECEIVER • Before making or changing connections, set the power switch to off and unplug the power cord from the AC outlet. • After completing connections, perform the “SYSTEM MODE setting” operation. USING THE DIGITAL TUNER (sold separately) TO WATCH DTV Manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. USING THE DIGITAL TUNER (sold separately) TO WATCH DTV USING THE DIGITAL TUNER (sold separately) TO WATCH DTV EDIT/ SOURCE INFO SUB CH INPUT RECEIVER 4. PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT e MENU MENU VOLINPUT VOL SELECTSPLIT 1 2 3 4 DTV 5°23 GUIDE 8 LEARN CH RETURN POWERPOWER POWER 1 173A FAVORITE CH 4 7 5 8 6 9 2 3 0 CH SET/ ENTER SEARCH ON/OFF VCR REC FREEZE TV TV TV/ DTV CBL /SAT DVD /LD VCR POWER CH ENTER VOL MUTING DTV MODE AUDIO DISPLAY ANT DTV/SAT DTV/DVD TOP DTV/(SAT) TV/SAT/DVD SCREEN 1 Set the SYSTEM MODE to ON. (Refer to page 66.) • Monitor input will be fixed to INPUT 1 and the picture from the input source selected by the receiver displayed. • To watch TV, switch the receiver input to where the monitor’s TV OUTPUT signal connects. • Channels can be selected using the monitor’s remote control. 2 Watching DTV 1 Switch the receiver to where the digital tuner’s signal connect. 2 Set the mode switch to TV/DTV on the monitor’s remote control. 3 Press the DTV button on the monitor’s remote control. • Switching the monitor to DTV mode makes it possible to view a high-quality 1080i picture. • Each time the DTV button is pressed, the operating mode will switch between DTV and TV mode. To change the input source, first switch to TV mode and then use the receiver to switch the input source. 4 Use the monitor’s remote control to select the channel. 5 Use the receiver to adjust the volume or select surround settings. NOTES: • When SYSTEM MODE is turned ON and the system is connected to a non-Dolby Digital receiver, no DTV audio output will be produced, and SYSTEM MODE should accordingly be turned OFF at such times. • Turning SYSTEM MODE ON will cause all monitor input to be input from INPUT 1, and SYSTEM MODE should accordingly be turned OFF when connected to RGB input. 85 OTHERS MENU INDEX MENU INDEX Main menu (See page 26) PICTURE adjustment menu (See page 48) PICTURE SOUND SCREEN SET UP CC USE: END: MENU PICTURE MODE : STD CONTRAST 0 0 0 0 0 BLACK LVL . COLOR TI NT SHARP OTHER EX I T USE: END: MENU PICTURE 3D Y/C LEVEL : 3 3D NR LEVEL : 3 COLO FLESH R T T O SVM:HIGH E N M E P : : O S N TD PURE ICNEMA : HQ OTHER EX I T USE: END: MENU SOUND adjustment menu (See page 55) MTS :MA I N BASS 0 0 0...
)
