Votes - 4, Average rating: 4.3
(
)
)
|
manual abstract
DESCRIPTION AND PREPARATION 1.1 INSTALLATION OF ANTENNA 300 OHM FLAT CABLE Connect the 75 OHM coaxial cable from the antenna to the antenna jack on the rear panel, as shown above. NOTE: • For better reception, especially in outlying area or where ghost or interference happens, an external roof-mounted antenna is recommended. • For UHF TV reception, use the specified UHF antenna. Consult the local sale dealer. • When using 300 OHM flat cable, a 300 OHM - 75 OHM adapter should be adopted for a proper connection to the antenna jack. 1.2 POWER CONNECTION_ Plug the AC cord into an AC outlet. NOTE: • This unit should be operated from a household 180-240V, ~50Hz. • When you disconnect the power supply cord, pull it out by the plug. Never pull the cord itself. 5 1.3 FRONT PANEL 1. POWER BUTTON To turn ON/OFF the TV set. 2. STANDBY INDICATOR Lights when TV is in the STANDBY MODE. 3. REMOTE SENSOR To receive the infra-red signals from remote handset. 4. PROGRAM(A/Y) BUTTONS Select program number cyclically. To turn on the TV when it is in standby mode. To select item in sub-menu. 5. VOLUME/PICTURE CONTROL ( A/T) BUTTONS To decrease / increase the sound volume and picture settings level. Channel searching upward/downward in MANUAL and FINE menu. 6. MENU BUTTON To display the main menu. Press and hold the MENU button for over 3 seconds, it will perform AUTO SEARCH function. 7. TV/AV BUTTON To switch between TV program and AV input. To turn on the TV when it is in standby mode. 8. SPEAKERS 6 1.4 REAR TERMINAL & SIDE AV 1. 75 OHMANTENNA INPUT 2. SCART AV INPUT/OUTPUT 3. AUDIO/VIDEO IN 2 (SIDE AV INPUT) 2 OPERATION OF REMOTE CONTROL 2.1 DESCRIPTION OF REMOTE CONTROL KEYS INTRODUCTION OF KEY FUNCTION This TV features with a full-function remote control handset. For a more compact remote unit design, some of the keys are multiple with more than one function. The following text describes the function of keys on remote control unit. Functions related to notebook operated are marked with a symbol*. 7 1. STANDBY BUTTON When the main power is on, to turn the TV set on or off. 2. MUTE BUTTON To temporarily turn off the sound and to restore it by pressing it again 3. SLEEP BUTTON Set the sleep timer from 120 to 10 minutes by pressing the SLEEP button repeatedly. To display the remaining time, press SLEEP button once. To cancel the sleep timer, press the SLEEP button until “OFF” appears. 4. DISPLAY BUTTON To display the current program number and function status. Press the button once again to display the current time on the screen. 5. SOUND SYSTEM BUTTON To directly select sound system without going into the submenu. 6. (0-9) DIGIT KEYS To select program number directly. *To select 0-9 digits, A-Z(or a-z) letters, common marks and punctuation marks when writing data or information to be stored in notebook. 7. RECALL BUTTON Press to return to the previously viewed channel. 8. PICTURE/* DELETE BUTTON Cyclically select the default setting level of picture. Within the on-screen menu of FAV.CH, press to delete the undesired channel NO. In notebook mode, to delete the word or symbols previously stored. 9. NOTEBOOK BUTTON To activate the notebook function. 10. GAME BUTTON To enter or exit the game directly. 11. FAVORITE BUTTON To browse the preset favorite channels. This button will not function if you have not set any favorite program. 12. COLOR SYSTEM BUTTON To select color system without going into submenu. 13. MENU/*INSERT BUTTON Press to display the main menu. Also goes back to the previous screen menu or exits the menu from screen. To insert or overwrite a letter, digit or symbol when you edit the information previously stored in notebook. 14. TV/AV BUTTON To switch between TV program and AV input sources. 8 15. CAPS BUTTON To select the input form before data or information writing between capital and small letter. 16. CALENDAR BUTTON To enter or exit the perpetual calendar directly. 17. OK BUTTON Within the on-screen menu, press to enter some special function such as game, notebook, calendar and etc. 18. VOLUME UP/DOWN BUTTON To decrease or increase the sound volume and picture setting level. In MANUAL menu, search channel upward or downward. 19. PROGRAM UP/DOWN BUTTON To select the next higher or lower program number. To select the item in submenu. 2.2 INSTALLATION OF BATTERIES 1. Open the battery compartment cover. 2. Install two size AA batteries in correct direction. 3. Close the battery cover. NOTE: • The lifetime of the batteries may last up to one year, depending on how often the remote control is used. For the best performance, the batteries should be replaced on a yearly basis, or when remote operation becomes erratic. • Be sure to place the batteries in the correct direction. • Do not mix old and new batteries, or different types. • Old batteries may leak chemical and damage the remote control. Always remove batteries as soon as th...