Votes - 3, Average rating: 3.7 ( )

Manafacture: Carrier File size: 5.71 mb File name: Language of manual:

F Indication symbols of LED on control panel: High fan speed Medium fan speed Low fan speed Auto fan speed Cooling Fan only Display set temp Display set timer Timer Above LED lights on when the relevant mode is in used. Energy-saving NOTE: Temperature setting range is from19 (66 ) to 31 (88 ). Fan Speed button Used to select fan speed in sequence auto, low, medium and high. Timer button Used to set or cancel timer operation. When the unit is in operation, you can set OFF TIMER. When the unit is off, you can set ON TIMER. Timer setting range is 0 to 24 hours. If the OFF TIMER is set, the timer LED displays the remaining time to turn off the unit for only 12 seconds, then LED shifts to display set temperature. If you press TIMER button within the 12 seconds, OFF TIMER will be canceled. If the ON TIMER is set, the timer LED displays the remaining time to turn on the unit. If you wantto cancel ON TIMER, press TIMER button. Used to set room temperature in COOLING mode or used to set time in TIMER mode. If the two keys are pressed at the same time, the temperature LED display will alternate between and . Button Electronic control panel model Heating HEAT: COOLING FAN ONLY HEATING ENERGY SAVING COOLING h Fan Speed Mode Timer Airconditioner Button The air conditioner will be started when it is energized or will be stopped when it is in operation, if you press this button. When the air conditioner is heating, allow 3 minutes after you press this button. NOTE: After setting the mode, allow 3 minutes before switching to another mode. In the FAN ONLY Mode, Room Temperature display range is from 0 (32 ) to 38 (99 ). Room Temperature below 32 ,the Temperature display L0. Room Temperature above 99 ,the Temperature display H1. Operating Instructions Remote control 1 2 3 4 7 Power Mode +_ Temp/Time Auto Power Saver Mid High Low Timer Fan Speed 1 2 3 8 5 6 84 5 6 7 9 9 Power BUTTON The appliance will be started when it is energized or will be stopped when it is in operation, if you press this button. Mode BUTTON Used to select the operation mode. BUTTONS Used to set room temperature in Cooling mode or used to set time in Timer mode. High BUTTON Used to select the high fan speed mode. Mid BUTTON Used to select the Mid fan speed mode. Low BUTTON Used to select the Low fan speed mode. Auto BUTTON Used to select the Auto fan speed mode. Timer BUTTON Used to set or cancel timer operation. Power Saver BUTTON Used to select the Energy-saving mode. When changing modes during operation, sometimes the unit does not always respond at once. Wait 3 minutes. Wait 3 minutes before restarting the appliance. 13 F HR FAN SPEED MODEOFFON/ TIMER Airconditioner WAIT THREE MINUTES BEFORE RESTARTING How to Insert the Batteries How to Use Remove the battery cover according to the arrow direction. Insert new batteries making sure that the (+) and (-) of battery are matched correctly. Reattach the cover by sliding it back into position. Note: Use 2 LR06 AA(1.5volt) batteries. Do not use re...

Download now

Please, enter two numbers from picture: