Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
Some incorrectly-formatted discs may still play, however, the playback and operational quality of the disc may be substandard. 16 DVD/DISC FUNCTIONS DVD/DISC FUNCTIONS Search Press SEARCH to go directly to a desired point of a disc (e.g., Title, Chapter, Time). DVD Chapter/Title Search • Press SEARCH once to display the Chapter/ Title Search Bar. • Press the LEFT/RIGHT navigation keys to select (highlight) an entry field. • Use the Numeric keypad to input the desired chapter/title number, or press the UP/DOWN navigation keys to increase/decrease the chapter/title number. • Press ENTER to confirm and execute the search or press SEARCH to exit search mode. DVD Time Search (within a specified title) • Press SEARCH twice to display the Time Search Bar. • Use the Numeric keypad to input the desired time (hours, minutes, seconds). • Press CLEAR to cancel any input errors. • Press ENTER to confirm and execute the search or press SEARCH to exit search mode. CD Time Search: • Press SEARCH once to display the CD Time Search Bar shown to the right. Hour • Use the Numeric keypad to input the desired time (hours, minutes, seconds). • Press CLEAR to cancel any input errors. • Press ENTER to confirm and execute the search or press SEARCH to exit search mode. Repeat Mode Press REPEAT to change the repeat mode of the player. Each successive press of REPEAT will change the mode as follows: Track Folder Disc Off Note: Chapter Title Disc Off Some DVD discs do not allow Repeat mode. Track Disc Off Repeat A-B Mode To repeat playback of a specific section of a disc (loop): 1. Press A-B to set the desired start point (“A”) of the section to be repeated. 2. Press A-B again to set the desired end point (“B” of the section to be repeated. 3. The section “A-B” will now play repeatedly as a loop. Press A-B again to resume normal playback. 0 03 30 SecondMinute 17 DVD/DISC FUNCTIONS DVD/DISC FUNCTIONS Multi-Angle/Subtitle/Audio • During playback of a DVD that has been mastered with multiple angles, press ANGLE to view the available alternate camera angles. (A DVD may have up to 9 selectable angles.) • During playback of a DVD that has been mastered with subtitles, press SUBTITLE to view the available subtitle tracks. (A DVD may have up to 32 selectable subtitles.) • During playback of a DVD that has been mastered with alternate language/audio tracks, press AUDIO to hear the alternate tracks. (A DVD may have up to 8 selectable audio tracks.) • During CD or MP3-CD playback, press AUDIO to change between stereo, left-channel, and right-channel audio (the default setting is stereo). Zoom Press ZOOM to change the magnification level of the picture. • During DVD playback, each successive press of ZOOM will change the level of magnification to: Zoom 2x, Zoom 4x, Normal. • During JPEG CD playback, each successive press of ZOOM will change the level of magnification to: 25%, 50%, 100%, 150%, 200%. When the magnification level is greater than Normal/100%, use the navigation keys (UP/DOWN/ LEFT/RIGHT) to pan around the magnified picture. Note: The picture quality will decrease as the zoom level increases. Program Enter Program mode to create a custom sequence of tracks to be played. (Program mode is available only when the player is in NAVIGATE OFF mode. Press the PBC button to set the player to NAVIGATE OFF mode.) Note: You can also use the numeric keypad to enter numbers directly in the fields. Use the navigation keys to move between entry fields. DVD Program Mode 1. Load a DVD and press PROGRAM. 2. Press the RIGHT navigation key to select the “Title” column; press the UP/DOWN navigation keys to select a title. 3. Press RIGHT to select the “Chapter” column; press UP/DOWN to select a chapter. 4. Press ENTER to confirm the selection. 5. Repeat steps 2-4 until you have finished programming your selections or when you have programmed the maximum 20 tracks. Title Chapter 6. Press PLAY to start playback. Press PROGRAM to cancel. 18 DVD/DISC FUNCTIONS DVD/DISC FUNCTIONS CD Program Mode 1. Load a CD and press PROGRAM. 2. Press the RIGHT navigation key to select the “Track” column; press the UP/DOWN navigation keys to select a track. 3. Press ENTER to confirm the selection. 4. Repeat steps 2-3 until you have finished programming your selections or when you have programmed the maximum 20 tracks. 5. Press PLAY to start playback. Press PROGRAM to cancel. MP3 Program Mode 1. Load an MP3-CD and press PROGRAM. 2. Use the navigation keys to select the desired file. • To navigate through subfolders: press the LEFT/RIGHT navigation keys to enter/exit a folder. 3. Press RIGHT to confirm. The confirmed file will be marked as a programmed file. 4. Repeat steps 2-3 until you have finished programming your selections or when you have programmed the maximum 20 tracks. 5. Press ENTER to confirm the selection. 6. Press PLAY to start playback. Press PROGRAM to cancel. 19 FUNCTION BUTTONS FUNCTION BUTTONS LCD Mode Press the LCD MODE button to adjust the brightness, contrast...