Votes - 3, Average rating: 3.7 ( )

Manafacture: Freecom Technologies File size: 137.25 kb File name: Language of manual:

1.4 Allocation of the drive letter to the Freecom drive (PC) After successfully completing the installation of the Freecom drive a new drive letter is assigned automatically. This can shift the drive letter of an internal drive (for example, 'D' to 'E'). If this leads to problems, it is possible to change the drive letter assignment as follows: 1. Click on the „Start“/“Windows“ button. 2. Right-click on „Computer“ and select „Manage“ – „Disk Management“. 3. Right-click on the drive whose drive letter is going to be changed and select „Change drive letter and path …“. 4. In the next window, click „Change“ and select a drive letter in “Assign the following drive letter …“. 5. Confirm the change by clicking on „OK“. Installing the application software Installing the application software Chapter : Installing the application software To record blank media, you must first install the Recording Software. We recommend using the software which has been provided with your drive. To install the application software, insert the "Application & Manuals" DVD, klick "Start" -"Roxio Creator" (PC) / "Start" -"Install Software" -"Roxio Toast" (Mac). Follow the instructions on screen. EN PC Mac Note: If you wish to use other software, please find out from the supplier whether his products support the Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro. Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro EN .1 Special Instructions before Writing a CD / DVD (Blu-ray discs only Freecom Blu-ray Rewriter) • YoushouldrealizethatwritingCD/DVDs/BDsisprincipallyasensitivedatatransmission procedure which can be disrupted by even the smallest mechanical disturbance. • NevercleantheFreecomBlu-rayRewriterPro/Blu-rayComboProwithacommercially available CD or a CD-ROM cleaning set. This can damage the drive. • RecordableandRewritableCD/DVDs/BDs(blanks)aremoresensitivethancommercially available CD/DVDs/BDs. Use only a solvent-free, non-abrasive marker when writing on a CD/DVD/BD. • Do not stick any conventional labels on the CDs/DVDs/BDs, since the adhesive can attack the medium. Special labels for CD/DVD/BDs media are available in retail computer stores. Never remove a label from a media otherwise you will damage the protective layer and make the CD/DVD/BD unusable. • The drive recognizes the medium as soon as it is placed into the drive. CD-R media are compatible with the vast majority of CD-ROM drives and CD audio players and work in most DVD-ROM drives. DVDs created on this DVD Recorder can be viewed on nearly all DVD players and DVD-ROM drives. 10 EN Using the Drive Chapter : Using the Drive How to Use the Discs Attention! When using CD-ROM,CD-R, CD-RW,DVD R/RW or Blu-ray discs, don’t attach any stickers or labels to the discs. Using discs with them attached not only causes read and write errors, but data on the disc may be lost due to damage to the disc itself. EN Using the Drive Chapter : Using the Drive How to Use the Discs Attention! When using CD-ROM,CD-R, CD-RW,DVD R/RW or Blu-ray discs, don’t attach any stickers or labels to the discs. Using discs with them attached not only causes read and write errors, but data on the disc may be lost due to damage to the disc itself. .1 Load the disc 1. Press the eject button. 2. Place the disc on the disc tray. Note! When using a cm CD/DVD, place it in the small round depression. The face with the label on it should be up. Never place two discs in the tray at the same time. Be careful not to touch the recording surface of the disc. 3. Load the disc by pressing the eject button or by lightly pushing in the disc tray. . Disc ejection 1. Press the eject button. 2. Slowly take the disc out of the disc tray. 3. Press the eject button or push the disc tray and the tray will be brought back into the drive. After ejecting the disc, return the tray inside the unit quickly. When the tray is in the ejected position, dust and other debris will enter, possibly causing read errors, write errors, or drive failure. 11 Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro EN . Emergency Eject This drivehasafunctionthatallowstheCD/DVD/BD tobe ejectedmanually if thisbecomes necessary in an emergency such as failure of the drive or a power outage. Follow the following procedures in such a case. Don’t use this feature except in an emergency. 1. Turn the power to OFF. 2. Poke a fine tipped object into the small hole above the eject button. The front door pops open and the disk tray comes partway out. 3. Pull the front door to open it all the way, then grip the disc tray between thumb and forefinger and gently pull it straight out. This feature is a last measure to be used only in an emergency. Using it excessively will cause malfunction. Note! If you cannot get a good grip on the disc tray with your fingers, use a steel binder clip or spring clamp to pull it out. 1 Trouble shooting - General problems Trouble shooting - General pro...

Download now

Please, enter two numbers from picture: