Votes - 0, Average rating: 0
(
)
)
|
manual abstract
1 Press MENU/DISP for 3 seconds. 2 Press or repeatedly until [REG] (Regional Radio) is displayed. 3 Turn to select a setting. Receive traffic announcement If you do not want to miss traffic announcement during enjoying music, you can turn on the TA ( Traffic Announcement) function. 1 Press MENU/DISP for 3 seconds. 2 Press or repeatedly until [TA] is displayed. the current mode) and begins t broadcast the announcement o traffic conditions. When the traf announcement is over, it return the previous mode. • [TA OFF]: Traffic announceme does not cut in. Set TA volume When TA (traffic announcement) signal interrupted, the volume can keep at a pr level. Follow steps below to set TA volum 1 Press MENU/DISP for 3 seconds. 2 Press or repeatedly until [TA V displayed. 3 Turn to select a volume level: 12(minimum) to 45(maximum). EN With this car audio system, you can listen to audio files from a player or make a call if bluetooth connection is available on your phone or player. Pairing bluetooth devices You can pair your bluetooth device with the unit as follows: 1 Turn on bluetooth function on the device. 2 Setup bluetooth fuction on your device. 3 Select “CEM250” in the pairing list. 4 Enter default password “0000”. » “[CONNECT]” is displayed on the panel if pairing succeeds. Tip • If the paired device is moved beyond the operational range, when it is brought back, please check if the device is still connected with the system: • . If they are connected, [Disconnect] (red icon) is displayed. • . If connection is lost, [Connect] (green icon) is displayed. Follow the instruction above to pair the device with the system again. Adjust microphone position For better sound quality in make/receive phone call through Bluetooth, place the microphone at a location close to mouth. 1 Make sure the supplied microphone is connected to the car audio system. (See “Connect wires” section). 2 Place the microphone at a proper location. For example, 20 EN • Or clip it on the sun-shield. Voice dialing You can dial a number by voice if your mobile phone suppor ts voice dialing. 1 Press for 3 seconds. » [VOIC DIAL] is displayed. 2 Speak a name stored in contact list stored in the phone. » The unit repeats the number and calls out. » [NO MATCH] is displayed if the unit does not recognize a number. Make a call 1 Press SOURCE repeatedly to select MUSIC]. 2 Press . 3 Press or to select from the follow list: • [DIAL NUM]: dial a number di • [DIALLED]: dialled number • [MISSED]: missed call • [RECEIVED]: received call • [ME PBK]: Phone director y • [SIM PBK]: SIM card directory 4 Press to confirm the selection. To dial a number directly, select [DIAL NUM] To use a number in call log or director y, select the options other than [DIAL NUM]. 1 Turn to select a number from call log or directory. 2 Press to dial. Call waiting If there is another incoming call during call, [CALL WAITING] flashes on the display panel. 1 Press to terminate the present call. » The other call is automatically answered. » The first call is terminated. Call transfer You can transfer voice from loudspeaker to mobile phones during call. 1 Press . » [TRANSFER] is displayed. Terminate call 1 Press to terminate call. Play audio files You can listen to audio from a bluetooth device and control playback with the unit. 1 Press SOURCE repeatedly to select [BT MUSIC]. • To play, press 1, . • To pause, press 1, again. EN 22 Play from USB/SD/SDHC/ MMC device Note Ensure that • the USB or SD/SDHC/MMC device contains playable music. Insert the USB device 1 Open the cover marked on the front panel. 6 Play audio files Note • Ensure that the disc or device contains playable fi les. Play a disc Note • You cannot play CDs encoded with copyright protection technologies. You can play commercially available audio CDs and these discs: • CD-Recordables (CD-R) • CD-Re-writables (CD-RW) • MP3 CDs • WMA CDs Note • Ensure that the disc contains playable content. 1 Press on the front panel to release the panel. 2 Insert a CD with the printed side facing up. 3 Close the panel. 4 Press 1, to start play. • To pause CD play, press 1 . • To resume CD play, press 1 again. Remove the CD To take out the CD, 1 Press . 2 Press beside the disc slot. Tip • If the disc is blocked in the disc compar tment, press and hold until the disc comes out. EN Remove the USB device 1 Press and hold to turn off the unit. 2 Remove the USB device. Insert a card Note • This unit suppor ts SD, SDHC, and MMC cards. 1 Press to release the panel. 2 Inser t the SD or MMC card into the card slot. » The unit star ts playing from the SD/ MMC card automatically. Remove the card 1 Press to turn off the unit. 2 Press the card until you hear a click sound. » The card is now disengaged. 3 Remove the card. or . • To search backward/for ward rapidly within the current track, press o for 3 seconds. • To pause, press 1, . • To resume play, press 1, again. Search for an MP3/WMA track 1 Press SEARCH for 3 seconds. » Search menu is displayed. » [FILE...